Bộ chuyển đổi nguồn DC-DC Phoenix Contact: QUINT-PS/12DC/24DC/ 5 - DC/DC converters (2320131)

Bộ chuyển đổi QUINT DC/DC, lắp trên ray DIN với Công nghệ SFB (Ngắt cầu chì chọn lọc), đầu vào: 12 V DC, đầu ra: 24 V DC/5 A.

- Mã thiết bị: 2320131
- Tên thiết bị: QUINT-PS/12DC/24DC/ 5 - DC/DC
- Catalogue.

 

Thông tin chi tiết sản phẩm

Input 

DC operation
Nominal input voltage range 12 V DC
Input voltage range 9 V DC ... 18 V DC
Wide-range input no
Input voltage range DC 9 V DC ... 18 V DC
Voltage type of supply voltage DC
Inrush current < 15 A (typical)
Inrush current integral (I2t) < 0.3 A2s
Mains buffering time typ. 3 ms (12 V DC)
Current consumption 15 A (12 V, IBOOST)
Reverse polarity protection ≤ 30 V DC
Protective circuit Transient surge protection; Varistor
Input fuse 25 A (internal (device protection))

Efficiency > 90 %
Output characteristic U/I
Nominal output voltage 24 V DC ±1 %
Setting range of the output voltage (USet) 18 V DC ... 29.5 V DC (> 24 V DC, constant capacity restricted)
Nominal output current (IN) 5 A (-25 °C ... 60 °C)
POWER BOOST (IBoost) 6.25 A (-25 °C ... 40 °C permanent, UOUT = 24 V DC )
Selective Fuse Breaking (ISFB) 30 A (12 ms)
Magnetic circuit breaker tripping B2 / B4 / C2
Derating 60 °C ... 70 °C (2.5%/K)
Feedback voltage resistance 35 V DC
Protection against overvoltage at the output (OVP) < 35 V DC
Max. capacitive load unlimited
Active current limitation Approximately 6.9 A
Control deviation < 1 % (change in load, static 10 % ... 90 %)
< 2 % (change in load, dynamic 10 % ... 90 %)
< 0.1 % (change in input voltage ±10 %)
Residual ripple < 75 mVPP
Output power 120 W
Peak switching voltages nominal load < 10 mVPP (20 MHz)
Maximum no-load power dissipation 2 W
Power loss nominal load max. 13.5 W
Rise time < 2 ms (UOUT (10 % ... 90 %))
Connection in parallel yes, for redundancy and increased capacity
Connection in series yes
2 (Devices)
Signal: DC OK active
Output description UOUT > 0.9 x UN: High signal
Switching voltage range 18 V DC ... 24 V DC
Maximum inrush current < 20 mA (short-circuit-proof)
Signal: POWER BOOST, active
Output description IOUT < IN: High signal
Switching voltage range 18 V DC ... 24 V DC
Maximum inrush current < 20 mA (short-circuit-proof)
Signal: UIN OK, active
Output description UIN > 9.6 V: high signal
Switching voltage range 18 V DC ... 24 V DC
Maximum inrush current < 20 mA (short-circuit-proof)