Bộ chuyển đổi nguồn DC-DC Phoenix Contact: QUINT-PS/60-72DC/24DC/10/CO - DC/DC converter (2905011)
- Bộ chuyển đổi QUINT DC/DC, phạm vi đầu vào rộng, lắp trên ray DIN, công nghệ SFB (Ngắt cầu chì chọn lọc), đầu vào: 60-72 V DC, đầu ra 24 V DC / 10 A.
- Mã thiết bị: 2905011
- Tên thiết bị: QUINT-PS/60-72DC/24DC/10/CO
- Catalogue.
Thông tin chi tiết sản phẩm
Input Data
| DC operation | |
| Nominal input voltage range | 60 V DC ... 72 V DC |
| Input voltage range | 42 V DC ... 96 V DC |
| Wide-range input | yes |
| Input voltage range DC | 42 V DC ... 96 V DC |
| Voltage type of supply voltage | DC |
| Inrush current | < 9 A (typical) |
| Inrush current integral (I2t) | 0.64 A2s |
| Mains buffering time | typ. 10 ms (60 V DC) |
| Current consumption | 5.6 A (60 V DC) |
| 4.7 A (72 V DC) | |
| Reverse polarity protection | ≤ 30 V DC |
| Protective circuit | Transient surge protection; Varistor |
| Input fuse | 10 A 150 V DC (internal (device protection)) |
| Efficiency | > 91 % (UIN 60 V DC / UOUT 24 V DC) |
| > 91 % (UIN 72 V DC / UOUT 24 V DC) | |
| Output characteristic | U/I |
| Nominal output voltage | 24 V DC ±1 % |
| Setting range of the output voltage (USet) | 18 V DC ... 29.5 V DC (> 24 V DC, constant capacity restricted) |
| Nominal output current (IN) | 10 A (-40 °C ... 60 °C) |
| POWER BOOST (IBoost) | 12.5 A (-40 °C ... 40 °C permanent, UOUT = 24 V DC) |
| Selective Fuse Breaking (ISFB) | 60 A (12 ms) |
| Magnetic circuit breaker tripping | B2 / B4 / B6 |
| Derating | 60 °C ... 70 °C (2.5%/K) |
| Feedback voltage resistance | 35 V DC |
| Protection against overvoltage at the output (OVP) | < 35 V DC |
| Max. capacitive load | unlimited |
| Active current limitation | 18 A |
| Control deviation | < 1 % (change in load, static 10 % ... 90 %) |
| < 2 % (change in load, dynamic 10 % ... 90 %) | |
| < 0.1 % (change in input voltage ±10 %) | |
| Residual ripple | < 20 mVPP |
| Output power | 240 W |
| Peak switching voltages nominal load | < 10 mVPP (20 MHz) |
| Maximum no-load power dissipation | 4 W (UIN 60 V DC) |
| Power loss nominal load max. | 24 W (UIN 60 V DC) |
| Rise time | < 2 ms (UOUT (10 % ... 90 %)) |
| Connection in parallel | yes, for redundancy and increased capacity |
| Connection in series | yes |
| Signal: DC OK active | |
| Output description | UOUT > 0.9 x UN: High signal |
| Switching voltage range | 18 V DC ... 24 V DC |
| Maximum inrush current | < 20 mA (short-circuit-proof) |
| Signal: POWER BOOST, active | |
| Output description | IOUT < IN: High signal |
| Switching voltage range | 18 V DC ... 24 V DC |
| Maximum inrush current | < 20 mA (short-circuit-proof) |
| Signal: UIN OK, active | |
| Output description | UIN > 19.2 V: High signal |
| Switching voltage range | 18 V DC ... 24 V DC |
| Maximum inrush current | ≤ 20 mA (short-circuit-proof) |
| Signal: DC OK floating | |
| Output description | Relay |
| Output voltage | ≤ 30 V AC/DC |
| Maximum inrush current | ≤ 100 mA |
Sản phẩm cùng loại
