Input data
| DC operation | |
| Nominal input voltage range | 350 V DC ... 900 V DC |
| Input voltage range | 300 V DC ... 1000 V DC |
| Wide-range input | yes |
| Electric strength, max. | ≤ 1050 V DC |
| Voltage type of supply voltage | DC |
| Inrush current | < 1 A (typical) |
| Inrush current integral (I2t) | < 0.38 A2s |
| Current consumption | 0.19 A (350 V DC) |
| 0.07 A (1000 V DC) | |
| Typical response time | < 1 s |
| Recommended breaker for input protection | 1 A (Characteristic gPV or comparable) |
| Recommended fuse for input protection | 1000 V DC |
| Efficiency | > 90 % |
| Output characteristic | U/I |
| Nominal output voltage | 24 V DC ±1 % |
| Nominal output current (IN) | 2.5 A (-25 °C ... 55 °C) |
| Derating | 55 °C ... 70 °C (2.5%/K) |
| Feedback voltage resistance | < 35 V DC |
| Protection against overvoltage at the output (OVP) | < 35 V DC |
| Control deviation | < 1 % (change in load, static 10 % ... 90 %) |
| < 3 % (Dynamic load change 10 % ... 90 %, 10 Hz) | |
| < 0.1 % (change in input voltage ±10 %) | |
| Residual ripple | < 20 mVPP (with nominal values) |
| Output power | 60 W |
| Maximum no-load power dissipation | < 0.5 W |
| Power loss nominal load max. | < 6.5 W |
| Rise time | < 1 s (UOUT (10 % ... 90 %)) |
| Response time | < 2 ms |
| Connection in parallel | yes, for redundancy and increased capacity |
| Connection in series | No |
| Signal: DC OK active | |
| Output description | UOUT > 0.9 x UN: High signal |
