Bộ nguồn Phoenix Contact: STEP3-PS/1AC/24DC/3.75/PT/LED - Power supply unit (1285036)

- Mô tả: kết nối ấn vào, ray DIN hoặc lắp trực tiếp, đầu vào: 1 pha, đầu ra: 24 V DC / 3,75 A.
- Mã thiết bị: 1285036
- Tên thiết bị: STEP3-PS/1AC/24DC/3.75/PT/LED
- Catalogue.

 

Thông tin chi tiết sản phẩm

Input data

AC operation
Network type Star network
Input voltage range 100 V AC ... 240 V AC -15 % ... +10 %
Derating < 100 V AC ... 85 V AC (1 %/V)
Typical national grid voltage 120 V AC
230 V AC
Voltage type of supply voltage AC/DC
Inrush current typ. 30 A (25 °C)
Inrush current integral (I2t) typ. 0.35 A2s
Frequency range (fN) 50 Hz ... 60 Hz ±10 %
Mains buffering time typ. 25 ms (120 V AC)
typ. 25 ms (230 V AC)
Current consumption 1 A (100 V AC)
0.45 A (240 V AC)
Protective circuit Transient surge protection; Varistor
Switch-on time typ. 2 s
Device mains fuse 4 A internal (device protection), slow-blow
Recommended breaker for input protection 6 A ... 16 A (Characteristics B, C, D, K)
Discharge current to PE < 0.25 mA
DC operation
Input voltage range 110 V DC ... 250 V DC -20 % ... +10 %
Derating < 110 V DC ... 88 V DC (1 %/V)
Current consumption 0.88 A (110 V DC)
0.38 A (250 V DC)

Efficiency > 92.5 % (120 V AC)
> 94 % (230 V AC)
Nominal output voltage 24 V DC
Nominal output current (IN) 3.75 A
Short-circuit-proof yes
No-load proof yes
Derating > 50 °C ... 70 °C (2 % / K)
Crest factor typ. 1.78
typ. 1.87
Output power (PN) 90 W
Connection in parallel yes, for increasing power and redundancy with diode
Connection in series yes, for increased output voltage
Feedback voltage resistance ≤ 35 V DC
Protection against overvoltage at the output (OVP) < 35 V DC
Residual ripple typ. 100 mVPP
Control deviation < 0.5 % (Static load change 10 % ... 90 %)
< 3 % (Dynamic load change 10 % ... 90 %, (10 Hz))
< 0.1 % (change in input voltage ±10 %)
Rise time typ. 100 ms (UOut = 10 % ... 90 %)
Minimum no-load power dissipation < 0.21 W (120 V AC)
Maximum no-load power dissipation < 0.21 W (230 V AC)
Minimum nominal load power dissipation < 7 W (120 V AC)
Power loss nominal load max. < 5.7 W (230 V AC)