| Size |
6 |
| Series |
MS |
| Assembly position |
Any
Preferably vertical |
| Design structure |
Electrically adjustable pressure regulator |
| Short circuit strength |
for all electrical connections |
| Controller function |
Output pressure constant
with initial pressure compensation
with secondary exhaust |
| Pressure gauge |
Optional
With display and control unit
with pressure gauge |
| Operating pressure |
0.8 ... 20 bar |
| Pressure regulation range |
0.3 ... 16 bar |
| Max. pressure hysteresis |
0.25 bar |
| Standard nominal flow rate |
2,200 ... 7,500 l/min |
| Analogue output |
0 - 10 V
4 - 20 mA |
| Duration of control at 25°C |
Max. 90 s |
| Type of inputs |
Per IEC 61131-2
No electrical isolation |
| Nominal operating voltage DC |
24 V |
| Current consumption at nominal operating voltage |
Max. 1 A |
| Current consumption |
Max 3.5 A at 24 V DC |
| Control duration/ interval ratio |
1:3 |
| Permissible voltage fluctuation |
+/- 10 % |
| Authorisation |
c UL us - Recognized (OL) |
| CE mark (see declaration of conformity) |
to EU directive for EMC |
| Operating medium |
Compressed air in accordance with ISO8573-1:2010 [7:4:4]
Inert gases |
| Note on operating and pilot medium |
Lubricated operation possible (subsequently required for further operation) |
| Corrosion resistance classification CRC |
2 - Moderate corrosion stress |
| Storage temperature |
-10 ... 50 °C |
| Food-safe |
See Supplementary material information |
| Medium temperature |
0 ... 50 °C |
| Protection class |
IP65 |
| Ambient temperature |
0 ... 50 °C |
| Product weight |
1,820 g |
| Analogue outputs, absolute accuracy at 25° C |
± 3% |
| Cable interface |
Input: M12x1 plug, 5-pin
Output: M8x1 plug, 3-pin |
| Mounting type |
Optional
Line installation
On sub-base
with wall/surface fixing
with accessories |
| Material operator unit |
PA |
| Material seals |
NBR |
| Material housing |
Aluminium die cast |
| Material membrane |
NBR |
