| Stroke |
10 ... 2,000 mm |
| Stroke servopneumatic positioning |
50 ... 750 mm |
| Stroke Soft Stop |
50 ... 750 mm |
| Stroke shortening in the end-positions |
>= 15 mm |
| Smallest positioning stroke |
3% of max. stroke
However, no more than 10 mm |
| Piston diameter |
100 mm |
| Based on the standard |
ISO 15552 (previously also VDMA 24652, ISO 6431, NF E49 003.1, UNI 10290) |
| Cushioning |
P: Flexible cushioning rings/plates at both ends |
| Mounting position, positioning |
Any |
| Mounting position, soft stop |
Any |
| Measuring method: displacement encoder |
Digital |
| Design structure |
Piston
Piston rod
Profile barrel |
| Position detection |
For proximity sensor
With integrated displacement encoder |
| Variants |
Clamping unit attached
Extended piston rod
Single-ended piston rod |
| Protection against torque/guide |
Guide rod with yoke
Square piston rod |
| Operating pressure |
<= 12 bar |
| Operating pressure, positioning / soft stop |
4 ... 8 bar |
| Max. travel speed |
0.7 m/s |
| Min. travel speed |
0.05 m/s |
| Typical short stroke positioning time, horizontal |
0,80/1,32 s |
| Typical long stroke positioning time, horizontal |
0,95/1,10 s |
| Mode of operation |
double-acting |
| Nominal operating voltage DC |
5 V |
| Authorisation |
RCM Mark |
| CE mark (see declaration of conformity) |
to EU directive for EMC |
| Operating medium |
Compressed air in accordance with ISO8573-1:2010 [6:4:4] |
| Note on operating and pilot medium |
Pressure dew point 10°C below ambient temperature/temperature of medium |
| Continuous shock resistance per DIN/IEC 68, parts 2 - 82 |
Tested in accordance with severity level 2 |
| Corrosion resistance classification CRC |
1 - Low corrosion stress |
| Max. magnetic interference field |
10KA/m at a distance of 100 mm |
| Protection class |
IP65
to IEC 60529 |
| Vibration resistance per DIN/IEC 68, parts 2 - 6 |
Tested in accordance with severity level 2 |
| Ambient temperature |
-20 ... 80 °C |
| Impact energy in end positions |
2.5 Nm |
| Max. torque for protection against rotation |
<= 3 Nm |
| Max. load, horizontal |
450 kg |
| Max. load, vertical |
150 kg |
| Min. load, horizontal |
32 kg |
| Min. load, vertical |
32 kg |
| Theoretical force at 6 bar, return stroke |
4,418 N |
| Theoretical force at 6 bar, advance stroke |
4,712 N |
| Moving mass with 0 mm stroke |
994 g |
| Additional weight per 10 mm stroke |
95 g |
| Basic weight for 0 mm stroke |
4,330 g |
| Additional mass factor per 10 mm of stroke |
31 g |
| Output signal |
Analogue |
| Repetition accuracy in ± mm |
0.5 mm |
| Max. controllable force during advance |
4,241 N |
| Max. controllable force during return |
3,976 N |
| Typical friction force |
160 N |
| Repetition accuracy, soft stop intermediate position |
+/- 2 mm |
| Electrical connection, displacement encoder |
8-pin |
| Cable length |
1.5 m |
| Mounting type |
with accessories |
| Pneumatic connection |
G1/2 |
| Materials note |
Conforms to RoHS |
| Material cover |
Wrought Aluminium alloy |
| Material seals |
NBR
TPE-U(PU) |
| Material cable sheath |
TPE-U(PUR) |
| Material piston rod |
High alloy steel |
| Material screws |
Steel |
| Material sensor cover |
Aluminium |
| Material sensor head |
POM |
| Material connector housing |
PBT |
| Material cylinder barrel |
Wrought Aluminium alloy |
