Công ty TNHH Kĩ thuật Thương mại Công nghệ MVN

Công ty TNHH Kĩ thuật Thương mại Công nghệ MVN

/uploads/images/slide/banner.jpg

Hotline: 090 324 6884

Menu
Hotline Tìm kiếm
Bộ nguồn Phoenix Contact 2320102 - QUINT-PS/24DC/24DC/20

Bộ nguồn Phoenix Contact 2320102 - QUINT-PS/24DC/24DC/20

Giá: Liên hệ

Bộ nguồn - 2320102 - QUINT-PS/24DC/24DC/20

  • Nhà sản xuất: Phoenix Contact
  • Mã hàng: QUINT-PS/24DC/24DC/20
  • Mã sản phẩm: 2320102
  • Xuất xứ: Trung Quốc

QUINT DC/DC converter with maximum functionality
DC/DC converters alter the voltage level, regenerate the voltage at the end of long cables or enable the creation of independent supply systems by means of electrical isolation.
QUINT DC/DC converters magnetically and therefore quickly trip circuit breakers with six times the nominal current, for selective and therefore cost-effective system protection. The high level of system availability is additionally ensured, thanks to preventive function monitoring, as it reports critical operating states before errors occur.

Số lượng
  • Thông tin sản phẩm
  • Yêu cầu gửi báo giá
  • Tài liệu kỹ thuật

    [Tải xuống]

    Product Details


     

    QUINT DC/DC converter with maximum functionality
    DC/DC converters alter the voltage level, regenerate the voltage at the end of long cables or enable the creation of independent supply systems by means of electrical isolation.
    QUINT DC/DC converters magnetically and therefore quickly trip circuit breakers with six times the nominal current, for selective and therefore cost-effective system protection. The high level of system availability is additionally ensured, thanks to preventive function monitoring, as it reports critical operating states before errors occur.


     

    DC operation
    Nominal input voltage range 24 V DC
    Input voltage range 18 V DC ... 32 V DC
    Extended input voltage range in operation 14 V DC ... 18 V DC (Derating)
    Wide-range input no
    Input voltage range DC 18 V DC ... 32 V DC
    14 V DC ... 18 V DC (Consider derating during operation)
    Inrush current < 26 A (typical)
    Inrush current integral (I2t) < 11 A2s
    Mains buffering time typ. 10 ms (24 V DC)
    Current consumption 28 A (24 V, IBOOST)
    Reverse polarity protection ≤ yes30 V DC
    Protective circuit Transient surge protection; Varistor
    Recommended breaker for input protection 40 A ... 50 A (Characteristics B, C, D, K)

    Efficiency > 93 %
    Output characteristic U/I
    Nominal output voltage 24 V DC ±1 %
    Setting range of the output voltage (USet) 18 V DC ... 29.5 V DC (> 24 V DC, constant capacity restricted)
    Nominal output current (IN) 20 A (-25 °C ... 60 °C)
    POWER BOOST (IBoost) 25 A (-25 °C ... 40 °C permanent, UOUT = 24 V DC )
    Selective Fuse Breaking (ISFB) 120 A (12 ms)
    Magnetic circuit breaker tripping B2 / B4 / B6 / B10 / B16 / C2 / C4 / C6
    Derating 60 °C ... 70 °C (2.5%/K)
    Protection against overvoltage at the output (OVP) < 35 V DC
    Max. capacitive load unlimited
    Active current limitation approx. 29 A
    Control deviation < 1 % (change in load, static 10 % ... 90 %)
    < 2 % (change in load, dynamic 10 % ... 90 %)
    < 0.1 % (change in input voltage ±10 %)
    Residual ripple < 20 mVPP
    Output power 480 W
    Peak switching voltages nominal load < 10 mVPP (20 MHz)
    Maximum no-load power dissipation 2.2 W
    Power loss nominal load max. 39 W
    Rise time < 2 ms (UOUT (10 % ... 90 %))
    Connection in parallel yes, for redundancy and increased capacity
    Connection in series yes
    Signal: DC OK active
    Output description UOUT > 0.9 x UN: High signal
    Switching voltage range 18 V DC ... 24 V DC
    Maximum inrush current < 20 mA (short-circuit-proof)
    Signal: POWER BOOST, active
    Output description IOUT < IN: High signal
    Switching voltage range 18 V DC ... 24 V DC
    Maximum inrush current < 20 mA (short-circuit-proof)
    Signal: UIN OK, active
    Output description UIN > 19.2 V: High signal
    Switching voltage range 18 V DC ... 24 V DC
    Maximum inrush current ≤ 20 mA (short-circuit-proof)
    Signal: DC OK floating
    Output description Relay
    Output voltage ≤ 30 V AC/DC
    Maximum inrush current ≤ 100 mA
    Signal: DC OK active
    Output description UOUT > 0.9 x UN: High signal
    Switching voltage range 18 V DC ... 24 V DC
    Maximum inrush current < 20 mA (short-circuit-proof)
    Signal: POWER BOOST, active
    Output description IOUT < IN: High signal
    Switching voltage range 18 V DC ... 24 V DC
    Maximum inrush current < 20 mA (short-circuit-proof)
    Signal: UIN OK, active
    Output description UIN > 19.2 V: High signal
    Switching voltage range 18 V DC ... 24 V DC
    Maximum inrush current ≤ 20 mA (short-circuit-proof)
    Signal: DC OK floating
    Output description Relay
    Output voltage ≤ 30 V AC/DC
    Maximum inrush current ≤ 100 mA
    Signal: DC OK active
    Output description UOUT > 0.9 x UN: High signal
    Switching voltage range 18 V DC ... 24 V DC
    Maximum inrush current < 20 mA (short-circuit-proof)
    Signal: POWER BOOST, active
    Output description IOUT < IN: High signal
    Switching voltage range 18 V DC ... 24 V DC
    Maximum inrush current < 20 mA (short-circuit-proof)
    Signal: UIN OK, active
    Output description UIN > 19.2 V: High signal
    Switching voltage range 18 V DC ... 24 V DC
    Maximum inrush current ≤ 20 mA (short-circuit-proof)
    Signal: DC OK floating
    Output description Relay
    Output voltage ≤ 30 V AC/DC
    Maximum inrush current ≤ 100 mA
    Signal: DC OK active
    Output description UOUT > 0.9 x UN: High signal
    Switching voltage range 18 V DC ... 24 V DC
    Maximum inrush current < 20 mA (short-circuit-proof)
    Signal: POWER BOOST, active
    Output description IOUT < IN: High signal
    Switching voltage range 18 V DC ... 24 V DC
    Maximum inrush current < 20 mA (short-circuit-proof)
    Signal: UIN OK, active
    Output description UIN > 19.2 V: High signal
    Switching voltage range 18 V DC ... 24 V DC
    Maximum inrush current ≤ 20 mA (short-circuit-proof)
    Signal: DC OK floating
    Output description Relay
    Output voltage ≤ 30 V AC/DC
    Maximum inrush current ≤ 100 mA

    Input
    Connection method Screw connection
    Conductor cross section solid min. 0.5 mm²
    Conductor cross section solid max. 16 mm²
    Conductor cross section flexible min. 0.5 mm²
    Conductor cross section flexible max. 16 mm²
    Conductor cross section AWG min. 8
    Conductor cross section AWG max. 6
    Stripping length 10 mm
    Screw thread M3
    Tightening torque, min 1.2 Nm
    Tightening torque max 1.5 Nm
    Output
    Connection method Screw connection
    Conductor cross section solid min. 0.2 mm²
    Conductor cross section solid max. 6 mm²
    Conductor cross section flexible min. 0.2 mm²
    Conductor cross section flexible max. 4 mm²
    Conductor cross section AWG min. 12
    Conductor cross section AWG max. 10
    Stripping length 8 mm
    Screw thread M3
    Tightening torque, min 0.5 Nm
    Tightening torque max 0.6 Nm
    Signal
    Conductor cross section solid min. 0.2 mm²
    Conductor cross section solid max. 2.5 mm²
    Conductor cross section flexible min. 0.2 mm²
    Conductor cross section flexible max. 2.5 mm²
    Conductor cross section AWG min. 24
    Conductor cross section AWG max. 12
    Screw thread M3
    Tightening torque, min 0.5 Nm
    Tightening torque max 0.6 Nm

    Types of signaling LED
    Active switching output
    Relay contact
    Signal output: DC OK active
    Status display "DC OK" LED green
    Note on status display UOUT < 0.9 x UN: LED flashing
    Color green
    Note on status display LED flashing
    Signal output: POWER BOOST, active
    Status display "BOOST" LED yellow/IOUT > IN : LED on
    Color yellow
    Note on status display LED on
    Signal output: UIN OK, active
    Status display LED "UIN < 19.2 V" yellow/UIN < 19.2 V DC: LED on
    Color yellow
    Note on status display LED on
    Signal output: DC OK floating
    Note on status display UOUT > 0.9 x UN: Contact closed

    Number of phases 1.00
    Insulation voltage input/output 1.5 kV (type test)
    1 kV (routine test)
    Insulation voltage input/output 1 kV (type test)

    Product type DC/DC converters
    MTBF (IEC 61709, SN 29500) > 554000 h (40 °C)
    Insulation characteristics
    Protection class III
    Degree of pollution 2

    Width 82 mm
    Height 130 mm
    Depth 125 mm
    Installation dimensions
    Installation distance right/left 0 mm / 0 mm (≤ 70 °C)
    Installation distance right/left (active) 15 mm / 15 mm (≤ 70 °C)
    Installation distance top/bottom 50 mm / 50 mm (≤ 70 °C)
    Installation distance top/bottom (active) 50 mm / 50 mm (≤ 70 °C)
    Alternative assembly
    Width 122 mm
    Height 130 mm
    Depth 85 mm

    Mounting type DIN rail mounting
    Assembly instructions alignable: PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm vertically
    alignable: PN <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom
    Mounting position horizontal DIN rail NS 35, EN 60715
    With protective coating No

    Color aluminium
    Housing material Metal
    Type of housing Aluminum (AlMg3)
    Hood version Galvanized sheet steel, free from chrome (VI)

    Ambient conditions
    Degree of protection IP20
    Ambient temperature (operation) -25 °C ... 70 °C (> 60 °C derating, 2.5 %/K, startup at -40°C type-tested)
    Ambient temperature (storage/transport) -40 °C ... 85 °C
    Ambient temperature (start-up type tested) -40 °C
    Climatic class 3K3 (in acc. with EN 60721)
    Max. permissible relative humidity (operation) ≤ 95 % (at 25 °C, non-condensing)
    Shock 18 ms, 30g, in each space direction (according to IEC 60068-2-27)
    Vibration (operation) < 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6)
    15 Hz ... 150 Hz, 2.3g, 90 min.

    Rail applications EN 50121-4
    Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations EN 50178/VDE 0160 (PELV)
    Standard - Electrical safety EN 60950-1/VDE 0805 (SELV)
    Standard – Safety extra-low voltage EN 60950-1 (SELV)
    EN 60204 (PELV)
    Standard - Safe isolation DIN VDE 0100-410

    Shipbuilding approval DNV GL (EMC B)
    UL approvals UL/C-UL listed UL 508
    UL/C-UL Recognized UL 60950-1
    UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D (Hazardous Location)

    Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
    EMC requirements for noise emission EN 61000-6-3
    EN 61000-6-4
    EMC requirements for noise immunity EN 61000-6-1
    EN 61000-6-2
    Noise immunity EN 61000-6-2:2005
    Electrostatic discharge
    Standards/regulations EN 61000-4-2
    Electrostatic discharge
    Contact discharge 8 kV (Test Level 4)
    Discharge in air 15 kV (Test Level 4)
    Comments Criterion A
    Electromagnetic HF field
    Standards/regulations EN 61000-4-3
    Electromagnetic HF field
    Frequency range 80 MHz ... 1 GHz
    Test field strength 10 V/m
    Frequency range 1 GHz ... 2 GHz
    Test field strength 10 V/m
    Frequency range 2 GHz ... 3 GHz
    Test field strength 10 V/m
    Comments Criterion A
    Fast transients (burst)
    Standards/regulations EN 61000-4-4
    Fast transients (burst)
    Input 2 kV (Test Level 3 - asymmetrical)
    Output 2 kV (Test Level 3 - asymmetrical)
    Signal 2 kV (Test Level 4 - asymmetrical)
    Comments Criterion A
    Surge voltage load (surge)
    Standards/regulations EN 61000-4-5
    Input 1 kV (Test Level 2 - symmetrical)
    2 kV (Test Level 3 - asymmetrical)
    Output 1 kV (Test Level 2 - symmetrical)
    2 kV (Test Level 3 - asymmetrical)
    Signal 1 kV (Test Level 2 - asymmetrical)
    Comments Criterion A
    Conducted interference
    Standards/regulations EN 61000-4-6
    Conducted interference
    I/O/S asymmetrical
    Frequency range 0.15 MHz ... 80 MHz
    Comments Criterion A
    Voltage 10 V (Test Level 3)
    Emitted interference
    Standards/regulations EN 61000-6-3
    Radio interference voltage in acc. with EN 55011 EN 55011 (EN 55022) Class B, area of application: Industry and residential
    Emitted radio interference in acc. with EN 55011 EN 55011 (EN 55022) Class B, area of application: Industry and residential
    Criterion A Normal operating behavior within the specified limits.
    Criterion B Temporary impairment to operational behavior that is corrected by the device itself.

     

Các sản phẩm khác

090 324 6884